Compact, modular, multi-technology fiber-optic tester

April 2, 2014
EXFO unveils its FTB-2 fiber-optic tester in small platform.

Test and measurement systems specialist EXFO Inc. (NASDAQ: EXFO) says that its new module-based FTB-2 Pro Compact Platform is the smallest available high-speed, multi-technology fiber-optic testing platform.

The FTB-2 supports two single-slot modules to enable, for example, a combination of Ethernet and optical time domain reflectometer (OTDR) test capabilities in the same unit. The system also supports spectral and multi-layer testing. In sum, the platform offers the necessary power to enable maximum efficiency in field testing in a compact system, EXFO says.

The FTB-2 Pro supports a range of module options, including:

-- The FTB-88100NGE, which covers Optical Transport Network (OTN), Ethernet and SONET/SDH technologies as well as CFP and CFP2 transceiver coverage, at rates from supports 10 Mbps to 100 Gbps.

-- The FTB-5240S and FTB-5240S-P, which offer spectrum analysis of polarization-multiplexed coherent 40G/100G DWDM wavelengths and intelligent in-band OSNR measurement for 40-Gbps and ROADM deployments.

-- The new FTB-8830NGE, a 10G multiservice test module for turn-up, circuit validation, and troubleshooting of Ethernet, SONET/SDH, OTN, Fibre Channel, and SyncE/1588 PTP services at up to 11.3 Gbps.

-- The FTB-7000 series of OTDRs, including the FTB-7200D, the FTB-7300E, and FTB-7600E. These modules offer singlemode and multimode configurations available at several wavelengths.

The FTB-2 Pro comes with a 10-inch high-resolution widescreen display and such connectivity options as Wi-Fi, Bluetooth, Gigabit Ethernet, and multiple USB ports. The use of the Microsoft Windows 8.1 Pro operating system enables the FTB-2 Pro to run many third-party applications as well, the company says. The platform also is compatible with EXFO Connect, a cloud-hosted services that enables network operators to optimize field test workflow and address operational barriers via automated asset management and test data management.

"Today's high-speed networks demand testing solutions that are flexible, scalable, and powerful enough to handle mass high speed link deployments. The FTB-2 Pro delivers the processing power, speed, ruggedness, and modularity of a high-end platform in a compact form factor," comments Etienne Gagnon, vice-president of EXFO's physical layer and wireless division. "This new member of the FTB ecosystem allows field technicians to have access to the tools they need and sets a new standard in high-performance platforms."

Source:Lightwave

Search for Test Equipment in our Online Buyer's Guide


About the Author

Matt Vincent | Senior Editor

Matt Vincent is a B2B technology journalist, editor and content producer with over 15 years of experience, specializing in the full range of media content production and management, as well as SEO and social media engagement best practices, for both Cabling Installation & Maintenance magazine and its website CablingInstall.com. He currently provides trade show, company, executive and field technology trend coverage for the ICT structured cabling, telecommunications networking, data center, IP physical security, and professional AV vertical market segments. Email: [email protected]

Sponsored Recommendations

imVision® - Industry's Leading Automated Infrastructure Management (AIM) Solution

May 29, 2024
It's hard to manage what you can't see. Read more about how you can get visiability into your connected environment.

Adapt to higher fiber counts

May 29, 2024
Learn more on how new innovations help Data Centers adapt to higher fiber counts.

Going the Distance with Copper

May 29, 2024
CommScopes newest SYSTIMAX 2.0 copper solution is ready to run the distanceand then some.