In-building DAS antennas are optimized for low PIM

Jan. 21, 2014
Pulse Electronics introduces its PIMinator antennas, whose -155 dBc PIM rating enables fewer dropped calls with higher cellular data rates.

Pulse Electronics (NYSE: PULS) has introduced 3 new low passive inter-modulation (PIM) distributed antenna system (DAS) in-building antennas for ceiling-mount, omni-directional applications. With a purported industry-leading PIM spec of -155 dBc at 2x20 watts, Pulse says its new line of PIMinator in-building DAS antennas meets the most demanding requirements of cellular operators and integrators of low PIM components for 2G, 3G, and LTE/4G bands.

The DASLTE500NF, DASLTENF, and DASLTEDIN are the first in Pulse's emerging line of PIMinator antennas for DAS networks. The units have a diameter of 8.27" (210.2 mm) with a height of 4.81" (122.1 mm). The DASLTE500NF antenna has a 500 mm plenum rated coaxial pigtail with N female connector; the DASLTENF antenna has an N female connector; and the DASLTEDIN has a female 7 16 DIN connector for easy connection to DAS networks.

The low PIM antennas meet the demand for high data rates and streaming video for mobile devices covering cellular bands, WiFi, and WiMAX from 698 through 5900 MHz; their wideband design meets the needs of operators around the world, says Pulse. Having an indoor DAS allows users to receive cellular coverage inside a building instead of depending on a cell site outside the building, notes the company.

"Low PIM is the key to the performance of DAS systems," comments Paul Fadlovich, director of infrastructure, Pulse Electronics' Wireless Division. "PIM reduces or degrades base station performance. With low PIM there are fewer dropped calls, higher data rates, and fewer problems for cellular phone users and operators to deal with. The Pulse PIMinator PIM spec of -155 dBc truly enables these systems to be maximized."

The patent-pending PIMinator antennas are housed in aesthetically pleasing injection-molded radomes. They are RoHS compliant and PIM certified, and come individually boxed or bulk packed. More information on the individual antennas can be found on the following PDF datasheets: DASLTE500NF; DASLTENF; DASLTEDIN.

More news: Pulse Electronics debuts 10GBase-T integrated connector module

About the Author

Matt Vincent | Senior Editor

Matt Vincent is a B2B technology journalist, editor and content producer with over 15 years of experience, specializing in the full range of media content production and management, as well as SEO and social media engagement best practices, for both Cabling Installation & Maintenance magazine and its website CablingInstall.com. He currently provides trade show, company, executive and field technology trend coverage for the ICT structured cabling, telecommunications networking, data center, IP physical security, and professional AV vertical market segments. Email: [email protected]

Sponsored Recommendations

imVision® - Industry's Leading Automated Infrastructure Management (AIM) Solution

May 29, 2024
It's hard to manage what you can't see. Read more about how you can get visiability into your connected environment.

Adapt to higher fiber counts

May 29, 2024
Learn more on how new innovations help Data Centers adapt to higher fiber counts.

Going the Distance with Copper

May 29, 2024
CommScopes newest SYSTIMAX 2.0 copper solution is ready to run the distanceand then some.